Essential Tools for Home Comfort and Efficiency: A Complete Guide
Essential Tools for Home Comfort and Efficiency: A Complete Guide Essential Tools for Home Comfort and Efficiency: A Complete Guide
Home cooler Round Extraction Fan
Edelbrock 8729 { Sellable : Yes }

Edelbrock 8729 { Sellable : Yes }

$ 49.20

$ 63.96

Unavailable
Edelbrock 8729 { Sellable : Yes }

Edelbrock 8729 { Sellable : Yes }

$ 49.20

$ 63.96

Title:
  • DefaultTitle
Unavailable
Please select combo product attributes
The combo subtotal is $,SAVE$

Product Details

Edelbrock part #8729 spacer kit includes a 7/16" thick spacer and two .045" thick gaskets for a total thickness of 1/2". The kit also has new base to upper fasteners to accommodate the spacer. There are several benefits to the kit. First it raises the upper manifold 1/2" for increase valve cover to upper plenum clearance. This is needed to run a taller cover such as when roller rockers are used. It also provides heat insulation between the lower and upper manifolds. As a third benefit the 1/2" extra runner length helps to produce more torque. Fits all Performer RPM II 5.0 PN 7123 based manifolds.



Specifications:

Description_ABR 7123MAN SPCR
Description_ASM Ford:Mustang V8:302 (5.0L)
Description_DEF Engine Intake Manifold Spacer
Description_DES CARBURETOR SPACER
Description_EXT Edelbrock Wood Fiber Laminate 1/2" Base to Upper Spacer Plate kit for Performer RPM II 5.0 Manifold PN 7123. Includes spacer plate, two gaskets, and longer bolts.
Description_EXT Edelbrock Wood Fiber Laminate 1/2in. Base to Upper Spacer Plate kit for Performer RPM II 5.0 Manifold PN 7123. Includes spacer plate; two gaskets; and longer bolts.
Description_FAB Creates Cooler/Denser Charge
Description_FAB Fiber Laminate Spacers
Description_FAB Includes all Necessary Hardware for Installation
Description_FAB Provide Heat Insulation Between Upper and Lower
Description_FAB Raise Intake 0.5in. For More Valve Cover Clearance
Description_INV 1/2" Base to Upper Spacer for PN 7123
Description_INV 1/2in. Base to Upper Spacer for PN 7123
Description_KEY 8729; Edelbrock; Spacer; EFI manifold spacer; 7123; RPM 2; ford small; block ford; SBF; Intake manifold spacer; ? inch base to upper spacer; engine; intake manifold; ford EFI; ford 302
Description_LAB Engine Intake Manifold Spacer #8729 For Edelbrock Part #7123, 7184, 7185
Description_LAB Engine Intake Manifold Spacer #8729 For Edelbrock Part #7123; 7184; 7185
Description_MKT Edelbrock part #8729 spacer kit includes a 7/16" thick spacer and two .045" thick gaskets for a total thickness of 1/2". The kit also has new base to upper fasteners to accommodate the spacer. There are several benefits to the kit. First it raises the upper manifold 1/2" for increase valve cover to upper plenum clearance. This is needed to run a taller cover such as when roller rockers are used. It also provides heat insulation between the lower and upper manifolds. As a third benefit the 1/2" extra runner length helps to produce more torque. Fits all Performer RPM II 5.0 PN 7123 based manifolds.
Description_SHO { Sellable : Yes }
Description_SHP { eo : 5in.}
Description_TRA Do not disconnect fuel lines unless absolutely necessary. Special tools and procedures are required to re-install fuel lines.
Description_TRA Do not overtighten the manifold to base fasteners. Use a short box or open end wrench only.
Description_TRA We recommend the use of Edelbrock Gasgacinch (Part #9300) on the intake manifold mounting surfaces of the cylinder head and on the bottom side of the intake manifold gaskets (side without silicon beads). The Gasgacinch will secure the gaskets in place, ensuring a proper seal.
Description_TRA You must check your hood clearance before installation. Due to the 1/2" additional height of the spacer, this spacer will not fit under the stock hood on some vehicles.
Description_TRA • We recommend the use of Edelbrock Gasgacin. (Part #9300) on the intake manifold mounting surfaces of the cylinder head and on the bottom side of the intake manifold gaskets (side without silicon beads). The Gasgacin. will secure the gaskets in place; ensuring a proper seal. • Do not overtighten the manifold to base fasteners. Use a short box or open end wrench only. • Do not disconnect fuel lines unless absolutely necessary. Special tools and procedures are required to re-install fuel lines. • You must check your hood clearance before installation. Due to the 1/2in. additional height of the spacer; this spacer will not fit under the stock hood on some vehicles.
height 1.0
length 22.0
LTL N
Material Wood Fiber Laminate
Mounting Hardware Included Yes
Quantity Kit
Recommended Use For Edelbrock Part # 7123, 7184, 7185
RGL WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Thickness .500
WARNING CA Proposition 65 Yes
WARNING CA Proposition 65 Message WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
weight 1.4
width 5.75

You May Also Like

Cart
Essential Tools for Home Comfort and Efficiency: A Complete Guide
Your cart is currently empty.